Connecting your Stratus 2s ADS-B receiver to your iOS device is a straightforward process primarily done through Wi-Fi, allowing your electronic flight bag (EFB) app to receive valuable in-flight weather and traffic information.
Prerequisites for Connection
Before you begin connecting your Stratus 2s, ensure the following are in place:
- Charged Stratus 2s: Your Stratus 2s receiver should be adequately charged or connected to a power source.
- Powered On: Turn on your Stratus 2s receiver.
- Compatible iOS Device: Have your iPhone or iPad ready with your preferred EFB application installed.
- Wi-Fi Enabled: Ensure that Wi-Fi is enabled on your iOS device.
Step-by-Step Connection Guide
Follow these steps to establish a connection between your Stratus 2s and your iOS device:
- Power On Your Stratus 2s: Locate the power button on your Stratus 2s unit and press it to turn the device on.
- Access iOS Settings: On your iPhone or iPad, open the Settings app.
- Navigate to Wi-Fi: Tap on Wi-Fi in the Settings menu.
- Enable Wi-Fi: Make sure the Wi-Fi toggle is switched to the "On" position.
- Select Stratus Network: Under the "Choose a Network..." section, you will see a list of available Wi-Fi networks. Look for the Stratus wireless network. Your Stratus's SSID (network name) is typically found on a label on the back of your receiver.
- Connect to Stratus: Tap on the identified Stratus wireless network to initiate the connection.
- Confirm Connection: Once your iOS device successfully connects to the Stratus wireless network, a blue checkmark will appear next to the network name, indicating a successful connection.
Verifying Your Connection
After connecting to the Stratus 2s Wi-Fi network, launch your preferred EFB application (e.g., ForeFlight Mobile). The app should automatically detect the connected Stratus 2s and begin displaying ADS-B weather and traffic information. Look for an indicator within your EFB app that confirms the Stratus 2s is connected and providing data.
Troubleshooting Tips
If you encounter issues connecting your Stratus 2s, consider these common solutions:
| Issue | Potential Solution |
|---|---|
| Stratus Wi-Fi Not Appearing | - Ensure the Stratus 2s is powered on. - Try restarting your Stratus 2s. - Ensure your iOS device's Wi-Fi is enabled. - Move closer to the Stratus unit to ensure it's within range. |
| Cannot Connect to Stratus Network | - Try "Forget This Network" for the Stratus Wi-Fi on your iOS device and then attempt to reconnect. - Restart both your iOS device and the Stratus 2s. - Ensure there are no other devices attempting to connect simultaneously that might be causing interference. |
| Connected, but No Data in EFB App | - Close and reopen your EFB application. - Verify your EFB app is up to date. - Check the status indicators on your Stratus 2s; refer to its manual for light indications for ADS-B reception status. |
| Connection Drops Intermittently | - Check the battery level of your Stratus 2s. - Minimize interference from other electronic devices. - Ensure your iOS device is not automatically switching to another known Wi-Fi network (e.g., your home Wi-Fi if available). |
For general guidance on connecting to Wi-Fi networks on your Apple device, you can refer to Apple Support's guide on connecting to Wi-Fi.
