To reset your Axis T8705 to its factory default settings, you will primarily use the device's physical restart button. This process will erase all custom configurations and restore the device to its original out-of-the-box state.
Understanding When to Reset Your Axis T8705
Resetting your Axis T8705 can resolve various issues and is typically performed for reasons such as:
- Troubleshooting: When the device is not functioning as expected, a factory reset can often resolve software-related glitches.
- Forgotten Passwords: If you've lost or forgotten the administrator password, a reset is the most direct way to regain access.
- Reconfiguration or Redeployment: Before moving the device to a new network environment or selling it, a reset ensures all previous settings are cleared.
Step-by-Step Guide to Factory Resetting Your Axis T8705
The most common and effective method to reset your Axis T8705 is using the physical restart button.
Method 1: Using the Restart Button (Hardware Reset)
This method directly resets all parameters to their factory defaults.
- Ensure Power: Make sure your Axis T8705 device is powered on and operational.
- Locate Button: Find the restart button on your Axis T8705. This is typically a small, recessed button that may require a straightened paperclip or a similar pointed tool to press.
- Perform Reset: With the device turned on, press and hold the restart button for 10 seconds.
- Release and Restart: Release the button. The device will then restart with all settings reverted to factory defaults.
What Happens After a Factory Reset?
After a factory reset, your Axis T8705 will exhibit the following behavior:
- Configuration Erased: All user-defined settings, including network configurations, user accounts, and security settings, are wiped clean.
- Default IP Address: The device will typically attempt to obtain an IP address via DHCP. If no DHCP server is available, it might revert to a default static IP address (commonly 192.168.0.90 for Axis devices).
- Default Login: Any custom user accounts or passwords will be removed. You will need to set a new administrator password upon initial access.
- Firmware Version: The firmware version installed on the device will generally remain the same; a factory reset does not downgrade or upgrade the firmware.
Essential Steps After a Factory Reset
Once your Axis T8705 has been reset, you'll need to reconfigure it for your specific network and operational needs.
- Discover the Device: Use
Axis IP UtilityorAxis Device Managerto locate the device on your network. These tools can help identify the new IP address assigned by DHCP or the default static IP. - Access the Web Interface: Open a web browser and navigate to the device's IP address.
- Set New Credentials: You will be prompted to create a new strong password for the root or administrator account. This is a critical security step.
- Reconfigure Settings: Proceed to re-apply your desired network settings, video configurations, user accounts, and any other specific operational parameters.
Important Considerations Before Resetting
Before performing a factory reset, consider these points to ensure a smooth process:
- Backup Configuration: If possible, always try to save a backup of your current device configuration via the web interface. This can save significant time during the reconfiguration process.
- Network Impact: Understand that the device's IP address and network settings will change, which might temporarily disrupt its accessibility on your network.
- Prepare Details: Have your network details (e.g., desired static IP, gateway, DNS servers) and any specific operational settings ready to re-enter.
| Setting Type | Default After Reset |
|---|---|
| IP Address | DHCP or 192.168.0.90 (if no DHCP) |
| User Credentials | Prompts for new administrator password |
| Network Settings | DHCP enabled (typically) |
| All Configurations | Erased |
For further assistance, you can always refer to the official Axis Support resources.
