To safely turn off your DJI aircraft and its remote controller, you generally follow a simple sequence: a quick press followed by a sustained press of the power button on each device, starting with the aircraft. This ensures a proper and safe shutdown after your flight.
Understanding the DJI Power Button Sequence
DJI devices, including both the aircraft and remote controllers, utilize a consistent power button sequence designed to prevent accidental power-offs:
- Short Press: This action typically checks the battery level when the device is off or indicates its current status when it's on.
- Long Press (after a short press): This combined action is used to power the device on or off.
Step-by-Step Guide to Powering Off
It is crucial to power off your DJI aircraft before powering off the remote controller. This recommended sequence helps ensure the aircraft properly disengages from the controller and prevents any unintended actions while the drone is still powered on.
1. Powering Off the DJI Aircraft
After landing your drone safely and confirming it is stable on the ground:
- Locate the Power Button: This button is typically found on the top or side of the aircraft's main body.
- Execute the Sequence:
- Press the power button once quickly. This usually illuminates the battery indicator lights.
- Immediately press and hold the power button for approximately 2–3 seconds. The aircraft's motors will power down, and its status indicator lights will turn off, indicating it's completely shut down.
2. Powering Off the DJI Remote Controller
Once the aircraft is completely powered off:
- Locate the Power Button: On your DJI remote controller (such as the DJI RC-N2 or similar models), the power button is typically located on the front or top of the device.
- Execute the Sequence:
- Press the power button once quickly.
- Immediately press and hold the power button for approximately 2–3 seconds. You will hear a distinct descending audible tone, indicating that the remote controller is powering off. The screen (if applicable) will go blank, and any indicator lights will extinguish.
- Exit DJI Fly App: After the remote controller has successfully powered off, you can safely exit the DJI Fly app on your connected mobile device (if you were using one for flight).
Summary Table: Power-Off Sequence
| Device | Action | Indicator |
|---|---|---|
| DJI Aircraft | Short press, then long press power button. | Motors stop, lights turn off. |
| Remote Controller | Short press, then long press power button. | Descending audible tone, screen goes blank. |
Why This Order Matters
Powering off the aircraft first minimizes the risk of:
- Accidental Motor Starts: If the remote controller were powered off first, the aircraft could potentially remain powered on and susceptible to stray signals or unintended inputs if left active.
- System Errors: A proper shutdown sequence ensures that all systems on both the drone and the controller conclude their operations correctly, maintaining the longevity and reliability of your equipment.
By following these simple and precise steps, you can ensure a safe and proper shutdown of your DJI drone and its remote controller after every flight. For more detailed instructions specific to your model, you can always refer to the official DJI Support page.
