Ova

How do I connect my HP Deskjet 2775 to WiFi?

Published in Printer WiFi Setup 5 mins read

To connect your HP Deskjet 2775 printer to WiFi, the most straightforward and recommended method is by using the HP Smart app on your mobile device. This app streamlines the setup process, guiding you step-by-step through the connection to your home network.

How Do I Connect My HP Deskjet 2775 to WiFi?

Connecting your HP Deskjet 2775 to WiFi is easiest using the HP Smart app, available for both Android and iOS devices. This app guides you through the entire process, ensuring a smooth connection to your home network.

Step-by-Step WiFi Connection Guide

Here’s how to get your HP Deskjet 2775 online using the HP Smart app and other common methods:

Method 1: Using the HP Smart App (Recommended)

The HP Smart app is designed to simplify printer setup and management, including connecting to WiFi.

  1. Prepare Your Printer:

    • Ensure your HP Deskjet 2775 printer is powered on.
    • Place the printer close to your WiFi router during the initial setup to ensure a strong signal.
    • Make sure the printer is in setup mode. For many HP Deskjet models, this means the wireless light might be blinking, or you might need to press and hold the Wireless button for a few seconds until it starts blinking. Refer to your printer's manual for specific instructions on entering setup mode if unsure.

  2. Download and Install the HP Smart App:

    • Now go to your Android device, specifically your Android phone, and download the HP Smart app from the app store (Google Play Store). For Apple users, download it from the App Store.
    • Once downloaded, open this HP Smart app.

  3. Add Your Printer and Connect to WiFi:

    • In the HP Smart app, tap the "+" sign or "Add Printer" to begin searching for your printer.
    • The app will detect nearby printers. Select your HP Deskjet 2775 from the list.
    • Follow the on-screen prompts. The app will guide you through connecting your printer to your home WiFi network. You will typically be asked to select your WiFi network name (SSID) and enter its password.
    • Once connected, the printer's wireless light should turn solid blue, indicating a successful connection.

Method 2: Using Wi-Fi Protected Setup (WPS)

If your router and printer support WPS, this can be a quick alternative.

  1. Check WPS Compatibility:

    • Locate the WPS button on your wireless router.
    • Ensure your printer has a WPS button or supports WPS (check your printer's control panel or manual). On many HP printers, you press and hold the Wireless button for a few seconds to initiate WPS mode.

  2. Initiate WPS Connection:

    • On your HP Deskjet 2775, press and hold the Wireless button for about three to five seconds until the wireless light starts blinking.
    • Within two minutes, press the WPS button on your router.
    • Wait for the printer's wireless light to turn solid blue, indicating a successful connection.

Method 3: Manual Wireless Setup (Via Embedded Web Server - EWS)

This method is more advanced and typically used if the above methods fail or if you prefer to configure directly.

  1. Print Network Configuration:

    • On your printer, press and hold the Information button (usually an "i" icon) until a network configuration page prints. This page will list the printer's current network status, including its temporary IP address or direct Wi-Fi network name if it's in Wi-Fi Direct mode.

  2. Connect to Printer's Direct Wi-Fi:

    • On your computer or mobile device, go to your Wi-Fi settings and connect to the printer's direct Wi-Fi network (e.g., "DIRECT-xx-HP Deskjet 2775"). There might be a password on the information page.

  3. Access Embedded Web Server (EWS):

    • Open a web browser (e.g., Chrome, Firefox, Edge) and type the IP address found on the network configuration page into the address bar, then press Enter. This will open the printer's EWS.

  4. Configure Network Settings:

    • Navigate to the Network or Wireless settings.
    • Select Wireless Setup Wizard and follow the prompts to choose your home WiFi network (SSID) and enter its password (WPA/WPA2 passphrase).
    • Apply the settings. The printer will then disconnect from its direct Wi-Fi and attempt to connect to your home network.

Troubleshooting Common Connection Issues

If you encounter problems during the setup, consider these tips:

  • Restart Everything: Turn off your printer, router, and computer/mobile device, then turn them back on in sequence (router first, then printer, then device).
  • Check WiFi Password: Double-check that you are entering the correct WiFi password (case-sensitive).
  • Router Band: Most HP Deskjet 2775 printers only support the 2.4 GHz WiFi band. Ensure your router is configured to broadcast a 2.4 GHz signal. If you have a dual-band router, ensure both bands are active, or try connecting to the 2.4 GHz specific network name if available.
  • Printer Location: Move the printer closer to your router to rule out signal strength issues.
  • Firmware Update: Ensure your printer's firmware is up to date. You can usually check and update this through the HP Smart app or the printer's EWS.

Key Requirements for WiFi Connection

To ensure a smooth setup process, have the following ready:

Requirement Description
HP Deskjet 2775 Powered on and in setup mode.
WiFi Router Turned on and broadcasting a 2.4 GHz signal.
WiFi Network Name Also known as SSID (e.g., "MyHomeWiFi").
WiFi Password The security key or passphrase for your home network.
Mobile Device Android or iOS phone/tablet with the HP Smart app installed.
Internet Access Required for downloading the HP Smart app and possibly for initial setup.

By following these steps, your HP Deskjet 2775 will be ready to print wirelessly from all your connected devices.

← Previous Article
What Does Interest Mean in Life Orientation?
Next Article →
How do I check my NTN number?