Removing the rear seat in a VF Holden Commodore is a straightforward process, involving two main stages: first the lower seat cushion, and then the backrest sections. This guide will walk you through each step to safely and efficiently remove your VF Commodore's rear seat.
Tools You Might Need:
- Socket wrench set (for backrest bolts)
1. Removing the Lower Rear Seat Cushion
The lower section of the VF Commodore's rear seat is designed for quick release, making it the first component to remove.
- Locate the Release Handles: Begin by finding the two black handles situated at the very bottom of the rear seat cushion. These handles are typically positioned where the seat fabric meets the floor carpet.
- Pull Forward: Once located, pull both handles firmly forward (towards the front of the car). This action disengages the locking mechanism that holds the lower cushion in place.
- Lift and Remove: After pulling the handles, lift the entire lower seat cushion straight up and out of the vehicle. It should now be free from its mounts.
2. Removing the Rear Seat Backrests
The backrests of the VF Commodore rear seat are typically divided into three pieces. For the left and right sections, you'll need to undo some bolts.
- Identify Sections: The rear seat backrest is composed of three distinct pieces: a left section, a right section, and a smaller middle section.
- Access the Bolts: For both the left and right backrest sections, you will find two bolts each located at the bottom of these sections. These bolts secure the backrests to the vehicle's frame.
- Undo the Bolts: Using an appropriate socket wrench, undo and remove these two bolts from the bottom of the left backrest. Repeat this step for the right backrest section.
- Remove Backrests: Once the bolts are removed, the left and right backrest sections can typically be lifted or maneuvered out of their mounting points. The removal process for the middle section may vary slightly but often becomes accessible or releases once the side sections are out.
Summary of Rear Seat Removal Steps
To help you visualize the process, here's a quick summary:
| Seat Component | Key Action | Details |
|---|---|---|
| Lower Cushion | Pull handles forward, then lift | Locate 2 black handles at the seat bottom, near the carpet. |
| Backrests | Undo bolts at the bottom, then remove | 2 bolts for the left section, 2 bolts for the right section. |
Always ensure you store any removed bolts and components safely for reinstallation. When reinstalling, reverse these steps, making sure all bolts are securely tightened and the seat locks firmly back into place.
For additional general automotive maintenance tips or to connect with other VF Commodore owners, you can explore resources like dedicated car forums or automotive enthusiast communities.
